ALLDREAMS Vision Gen AI by SPORTOTEAM

Digital foot health analysis

We don’t just look at the foot. We scan it in 3D, measure its pressure and interpret it clinically.

The foot is scanned in 3D and static and dynamic plantar pressure is measured; the two datasets are evaluated together and more than 20 anatomical and biomechanical parameters are reported. The aim is not merely to see how the foot meets the ground, but to build a personal biomechanical profile from arch structure, pressure distribution, left–right difference and heel alignment together — and, where needed, to design a custom orthopaedic insole from that data.

Feet on a pressure platform, an insole and foot pressure maps on screen

Foot structure and foot strike, read together.

Looking at the foot only by its shape, or only by its pressure map, gives an incomplete picture. The OPTIYOU measurement system evaluates 3D foot scanning and plantar pressure data together, taking a holistic view of the person’s biomechanics. Arch, hallux and heel structure come from the 3D model; load distribution and high-pressure points come from pressure measured while standing and stepping.

From measurement to decision

Precise measurement, a personal solution.

Scan and pressure findings complement the clinical examination; the specialist makes the decision. Results are explained in plain language to the athlete, the coach and the family.

Bare feet on a pressure platform, an insole and foot pressure maps on screen

Plantar pressure

Map how the foot takes load

Static and dynamic plantar pressure: load distribution, high-pressure points and the differences between the two feet, on one map.

  • Plantar pressure map
  • Point pressure analysis
  • Left–right load difference
A specialist scanning a person’s foot with a 3D foot scanner

3D scanning

Measure the foot in 3D

The algorithm identifies anatomical key points on the scan; arch, hallux and heel structure are turned into numbers.

  • Arch height and arch index
  • Hallux angle
  • Inward or outward heel tilt
A custom orthopaedic insole standing in front of its box

Custom insole

From data to a custom insole

Where there is a clinical need, an orthopaedic insole matched to the person’s biomechanics is designed from the scan and pressure data under expert supervision.

  • Arch height and heel cup
  • Metatarsal and heel pads
  • Varus/valgus wedge
A CNC machine milling an insole mould

Production & follow-up

Digital from production to follow-up

Insoles are produced in the Digital Manufacturing Lab; every new measurement is compared with earlier ones and the insole is re-optimised when needed.

  • 3D printing and CNC production
  • Check-up every 6–12 months
  • Insole re-optimisation

3D scanning, insole and digital manufacturing images: OPTIYOU

What we evaluate

Eight headings, one profile.

01

3D foot scan

A three-dimensional model of the foot; the algorithm identifies anatomical key points automatically.

02

Static plantar pressure

Pressure and load distribution of both feet while standing.

03

Dynamic plantar pressure

How pressure moves across the sole of the foot while stepping.

04

Point pressure analysis

High-pressure points in areas such as the metatarsals and the heel.

05

Arch analysis

Arch height and arch width index; flat-foot and high-arch tendencies.

06

Hallux analysis

Big-toe angle and hallux valgus tendency.

07

Heel analysis

Inward (varus) or outward (valgus) tilt of the heel.

08

Foot health score

A summary out of 100 across pressure comfort, stability and arch support.

How it works

Four steps.

  1. 01

    Clinical evaluation

    A specialist reviews the complaint, sport history, injury history and the structure of the foot and lower limb.

  2. 02

    3D scan and pressure measurement

    The foot is scanned in 3D; static and dynamic plantar pressure is measured on a pressure platform.

  3. 03

    Analysis and interpretation

    More than 20 parameters are reported with AI-supported analysis; the specialist interprets them together with examination findings and other performance tests.

  4. 04

    Custom insole, if needed

    Where there is a clinical need, the insole is designed and produced from the data, then re-optimised at a check-up every 6–12 months.

Who it is for

Growing children and teenagers

Tracking foot development; flat-foot, high-arch, in-toeing and out-toeing tendencies.

Athletes

Load distribution, high-pressure points and left–right differences in individual and team athletes.

People with orthopaedic problems

Flat foot or high arch, overpronation, heel spur, hallux valgus and diabetic foot.

People on their feet all day

Healthcare workers, teachers, factory workers and others who stand for long hours.

After surgery or injury

Following change during treatment with objective data.

Why it matters for athletes

The foot is the start of the kinetic chain — not just what touches the ground.

Foot and plantar analysis reveals an athlete’s loading characteristics, side-to-side differences and foot-strike pattern, and contributes to a fuller performance assessment. Results are read, where needed, together with our other measurements — force, jump, posture, balance, sport — to build a more complete biomechanical profile.

Not one device result, but a whole evaluation.

Foot Analysis + Clinical Examination + Posture + Strength + Balance + Explosive Power + Movement Analysis + Sport — evaluated together to form the person’s functional profile.

Data-driven orthopaedic insoles — only when clinically indicated.

If the analysis shows a clinical need, the insole is designed from the 3D scan and plantar pressure data, under expert supervision, to match the person’s biomechanics: arch height, heel cup, metatarsal and heel pads, varus/valgus wedge. It is produced with 3D printing and CNC machining in the Digital Manufacturing Lab (DML), founded through a university–industry partnership. Insoles are never issued as standard.

Digital follow-up

The first measurement is only the starting point. Every new measurement is compared with earlier ones; check-ups every 6–12 months evaluate the insole’s effect, and the insole is re-optimised when needed. Results are followed on a digital dashboard together with the foot health score.

OPTIYOU foot & insole analysis presentation

3D foot scanning, plantar pressure measurement, data-driven orthopaedic insoles and digital follow-up — an introduction to the system we offer with our partner OPTIYOU.

8 pages · PDF · 3.5 MB

Frequently asked

How long does the analysis take?

The 3D scan and pressure measurement are quick; with the clinical consultation, the total time depends on the chosen protocol.

How is the measurement done?

The foot is scanned with a 3D scanner, then static and dynamic plantar pressure is measured on a pressure platform. It is painless.

Will I definitely need an insole afterwards?

No. The need for an insole is decided from the clinical evaluation and analysis results together.

How often is the insole checked?

A check-up every 6–12 months is recommended; the new measurement is compared with the previous one and the insole is re-optimised when needed.

Can it be used for athletes?

Yes — particularly for load distribution, high-pressure points and left–right differences.

Start here

Tell us who you are, and what you are trying to decide.

A club, a school, a parent or an athlete — the first conversation is the same: what do you already know, and what would change if you knew more? We reply within two working days.

We do not publish prices. Every programme is scoped to the organisation or family — tell us your situation and we will propose one.

Your details are used only to reply to you. No newsletter, no third parties.